Monthly Archives: October 2011

Wichita Aero Club seeking nominations for trophy recipient

It’s that time again. The Wichita Aero Club is seeking nominations for its second annual Wichita Aero Club Trophy.

The trophy is presented to someone with ties to the local community whose achievements and contributions in aviation or aerospace deserves recognition.

The trophy will be presented at a gala on Saturday, January 28 at the Wichita Airport Hilton.

Last year, the trophy was awarded to Velma Wallace, widow of former Cessna chairman Dwane Wallace, one of general aviation’s first women pilots and a Wichita philanthropist.

“The Wichita Aero Club trophy has been created to recognize both contemporaneous accomplishment or a lifetime of achievement,” said Dave Franson, Wichita Aero Club executive director.

But nominees can be individuals or organizations that could be recognized for a recent milestone or single event.

To make a nomination or for more information, go to http://www.wichitaaeroclub.com/award.

Boeing Wichita delivers C-40 to Navy for troop and cargo missions

Boeing Wichita delivered its 12th C-40A aircraft, a modified Boeing 737-700 airliner, to the U.S. Navy for troop and cargo transport missions.

The plane was delivered Friday with a “passing of the key” ceremony attended by Boeing and Navy officials in Wichita before it took off for the Naval Air Station North Island in San Diego.

“This aircraft increases the Navy’s capability for rapid response worldwide, and we’re looking forward to continuing to enhance the fleet with as many aircraft as the Navy requires,” Steve Wade, general manager of Boeing’s global transport and executive systems, said in a statement.

Rear Adm. Bryan Cutchen, deputy chief of Navy Reserve, said in a statement that the plane provides important capability, reliability and lower cost.

“This new aircraft will help the Navy meet our current challenges today and helps us build a relevant and capable future force,” Cutchen said.

Boeing conference call tomorrow to indicate 787 profitability

Boeing will release its third quarter financial results Wednesday and hold a conference call with analysts and journalists. During the call, Boeing is expected to disclose the number of 787s over which it will spread its manufacturing costs over.

Boeing executives have long said that the 787 Dreamliner program will be profitable. The “accounting block,” as it’s called, will be the number of planes that it will take to at least break even on the manufacturing costs.  The Seattle Times explored the issue in a story today.

By the end of June, 787 manufacturing costs totaled $16 billion. In addition. Boeing spent about $15 billion in preproduction development costs and at least $1 billion more to buy out struggling plants from partners, according to a Seattle Times estimate.

On previous programs, Boeing has spread costs of the programs over an initial block of 400 planes. Analysts think the number for the 787 will be at least 1,000 planes.

Even so, some analysts think the number needed to make a profit will be much higher because it will take time to get production costs in check.

The current state of production doesn’t encourage optimism, the Seattle Times said.

Piper Aircraft suspends light jet program, to cut 150 employees

Piper Aircraft, which was recruiting for employees in Wichita just three weeks ago, is suspending development on its $2.5 million Altaire business jet and cutting about 150 jobs at its Vero Beach, Fla. facility.

The program’s suspension comes after an evaluation of the economic conditions and forecasts for the light jet market, despite the program being on schedule, on budget and hitting aircraft performance targets, company officials said.

Planned development costs have risen above the point that would be recoverable with the current market forecasts, they said.

The company held a job fair in Wichita Oct. 7 to recruit employees primarily for the Altaire business jet program

Piper will cut 150 jobs on a schedule as the program ramps down. That will bring employment from 850 people to about 700. It also will quickly eliminate 55 positions held by contract personnel.

“Clearly, the market for light jets is not recovering sufficiently and quickly enough to allow us to continue developing the program under the economic circumstances we face,” Piper interim president and CEO Simon Caldecott said in a statement.

Piper will not say how much it had budgeted for the Altaire’s development or its expenses to date. It will refund the deposits of  Altaire customers, or they can use them toward other Piper aircraft.

In the meantime, the company plans to step up product improvements for its current line of turboprop and piston-powered airplanes, Caldecott said. To that end, Piper will increase the number of employees who are dedicated to its sustaining engineering function, it said. Piper also is initiating third-party engineering and manufacturing services to preserve as many jobs as possible.  And it will work with other employees who want to hire experienced employees.

The company is primarily owned by the Ministry of Finance of the Government of Brunei.

Last week, Piper announced that it was evaluating whether to suspend development of the Altaire. It also announced that president Geoff Berger was leaving the company and named Caldecott interim president and CEO. It also announced that Piper executive vice president Randy Groom was leaving the company. Groom formerly served with Caldecott at Hawker Beechcraft in Wichita.

The action came just days after Piper showcased the Altaire at the National Business Aviation Association’s annual convention held in Las Vegas this month.

Groom told Aviation Week that Piper had estimated that orders would last through the first three years of production. The company has not released sales numbers.

Bombardier to build Global 7000, 8000 aft fuselage at its Mexico facility

Bombardier Aerospace‘s site in Queretaro, Mexico, is taking on new work.

The company said today that the aft fuselage section of its new Global 7000 and Global 8000 business jets will be built at its Queretaro facility.

The site has been producing large components for several of its business aircraft, including the Learjet 85, which will be assembled in Wichita, and its Global 5000 and Global 6000 jets, officials said.

The Queretaro site performs fuselage layup and sub-system installation, wiring harness fabrication and installation, wing assembly and horizontal and vertical stabilizer assemblies.

“We are confident that our team’s proven excellence, dedication and commitment to excellence on the current production Global aircraft will make a positive contribution to these innovative new aircraft,” Real Gervais, vice president of Bombardier’s Mexico manufacturing center, said in a statement.

Final assembly of the Global 7000 and Global 8000 jets will take place at Bombardier’s Toronto site. Interior completions will take place at its site in Dorval, Quebec.

Spirit AeroSystems ships first panels for Airbus A350 XWB

A gigantic Russian Antonov An-124 aircraft carried the first Airbus A350 XWB composite fuselage section panels from Spirit AeroSystems’ plant in Kinston, N.C., where they were manufactured, to its plant in St. Nazaire, France. The shipment left Saturday afternoon.

The upper shell panels are for the first production center fuselage for the A350.  Spirit workers in France will perform the final upper shell assembly. The panels for the lower shell of the center fuselage will deliver to Spirit’s French facility by the end of the year.

“With help from our customer, we have successfully integrated the Airbus methods, tools, processes and systems,” Dan Wheeler, vice president and general manager of Spirit’s North Carolina plant, said in a statement. “Shipment of these composite fuselage panels represents a significant achievement for Spirit employees as we work with Airbus to meet all their requirements and delivery schedules for the pre-final assembly plane.”

Final assembly for the upper and lower panels, which will become the center fuselage section over the wing, will occur during the first quarter of 2012.

Russian engineers doing Boeing work denied entry to U.S.

Fifteen engineers from Boeing’s engineering design center in Moscow were denied entry to the country by the U.S. Customs and Protection after they arrived at the Seattle-Tacoma International Airport, the Seattle Times reports.

They were sent back to Russia. The engineers reportedly had B-1 visas, but a B-1 visa does not allow visitors to do paid work for a company while they’re here. The engineers are not employed by Boeing, but work as lower-paid contractors, the report said.

A Boeing spokesman said the engineers were traveling with the proper visas, and that the company is working with customs officials on how to move forward. In the meantime, Boeing  has suspended travel for other engineers from Russia until it can determine how to proceed, the report said.

Airbus Americas CEO to speak at Wichita Aero Club today

Barry Eccleston, president and CEO of Airbus Americas, will be the keynote speaker at today’s Wichita Aero Club luncheon. Eccleston oversees Airbus’ efforts in the U.S. and Canada, including sales and marketing, service and training.

Eccleston, 64, began his career in aviation as a flight test engineer for Rolls-Royce, later becoming president and CEO of Rolls-Royce Industries Canada. He also served as CEO of International Aero Engines and held executive positions with Fairchild Dornier and Honeywell. Before joining Airbus, Eccleston was vice president and general manager of Honeywell’s Engines, Systems and Services’ propulsion systems enterprise.

Eccleston has a bachelor’s degree in aeronautical engineering from Loughborough University in England and completed the International Executive program at the Institute of Management Development in Switzerland. He also is a private pilot.

He was born in the United Kingdom and became a U.S. citizen in 1997. Eccleston is married with a son and a daughter.

The luncheon will be held at noon at the Wichita Airport Hilton hotel. Networking begins at 11:15. For more information, go to www.wichitaaeroclub.org

Randy Groom and Piper Aircraft CEO leave the company, review of Altaire program underway

Randy Groom, executive vice president of Piper Aircraft who headed the company’s sales and marketing efforts, has left the company. So has Piper’s interim CEO Geoff Berger.

The company announced the changes today.

Groom is a former Wichita Hawker Beechcraft executive.

Simon Caldecott will serve as the new interim president and CEO of the Vero Beach, Fla.-based company.

The changes take place as Piper reviews development of its business jet, called the Altaire.

“This is being undertaken to ensure the company is properly aligning business goals and light jet market forecasts with investment strategies and economic forecasts,” Caldecott said in a statement. “The company will announce the conclusion of this review to employees and the industry as soon as possible.”

Groom joined Piper in April 2010.  After leaving Hawker Beechcraft, Groom founded Groom Consulting, an Andover-based consulting firm.

Caldecott joined Piper in 2009, where he’s held the position as vice president of operations.  He previously served as vice president of assembly integration and testing with Raytheon Aircraft, then held the position of vice president of assembly operations with Raytheon Aircraft’s successor, Hawker Beechcraft.


NBAA convention ends with increase in attendees, exhibits

Although it’s still tough economic times for the business jet industry, that didn’t stop visitors from attending this week’s NBAA convention in Las Vegas.

“It’s clear that the convention continues to be a must-attend event for anyone whose passion or profession involves business aviation,” NBAA president and CEO Ed Bolen said.

The show ran from Monday through Wednesday and drew 26,077 people, a 7 percent increase in attendance over last year’s show.

International visitors were up 23 percent, with nearly 4,000 attendees from 88 countries.

The number of exhibitors increased 2 percent to 1,106 and 101 airplanes were on display.

“By every key measure, this year’s convention met or exceeded NBAA’s expectations,” Bolen said.

Everyone in the industry turns out for the show.

“It’s a very small community,” said Paul Jonas with Wichita State University’s National Institute for Aviation Research.

NIAR is one of the partners with the Greater Wichita Economic Development Coalition and has shared booth space with the GWEDC.

Besides manning the booth and talking about NIAR, Jonas has been meeting up with friends and former co-workers all week.

“It’s amazing how many people make a stop in their careers in Wichita, Kansas,” Jonas said.